GAR-DO Rod Ends

Technical parameter Unit Value
Sliding contact surface Steel / Steel
Working temperature °C -50 / +150
-30 / +130 (with seals)
Type of lubrication Grease / Oil
Bore size range mm 6 – 45
Seals Available (2RS)

Available with left-hand thread (GAL/GIL)
Looking for GIR-DO (female) Rod End Sizing?

Rod Ends: GAR-DO Sizing


Dimensions (mm) Basic Load Ratings (kN)
Ball Housing Head Length To Part Thread Thread Ball Dynamic Static Tilt
Product Number Bore Width Width Dia. Ball Center Length Length Size Dia. Load Load Angle Mass
Standard with Seals d B C D h1 L4 L3 6H dm Cr Cor α° (g)
GAR 6 DO 6 6 4.4 21 36 56.5 18 M6 10.0 3.6 10.2 13 18
GAR 8 DO 8 8 6 24 42 54 22 M8 13.0 5.9 16.0 15 32
GAR 10 DO 10 9 7 29 48 62.5 26 M10 16.0 8.7 22.0 12 54
GAR 12 DO 12 10 8 34 54 71 28 M12 18.0 11.4 30.4 11 86
GAR 15 DO 15 12 10 40 63 83 34 M14 22.0 17.6 44.8 8 140
GAR 17 DO 17 14 11 46 69 92 36 M16 25.0 22.4 56.5 10 200
GAR 20 DO 2RS 20 16 13 53 78 104.5 43 M20x1.5 29.0 31.5 75.6 9 310
GAR 25 DO 2RS 25 20 17 64 94 126 53 M24x2 35.0 51.0 88.2 7 560
GAR 30 DO 2RS 30 22 19 73 110 146.5 65 M30x2 40.0 65.5 119.0 6 890
GAR 35 DO 2RS 35 25 21 82 140 181 82 M36x3 47.0 210.0 159.0 6 1400
GAR 40 DO 2RS 40 28 23 92 150 196 86 M39x3 53.0 277.0 194.0 7 1800
GAR 45 DO 2RS 45 32 27 102 163 214 94 M42x3 60.0 360.0 259.0 7 2600

Speak with a bearing expert before placing an order to verify the part will accommodate the intended application usage.

Part numbers are right-hand thread. Left-hand thread uses an “L” after “GA-DO” to read “GAL-DO”.