MC Rod Ends

Technical parameter Unit Value
Sliding contact surface Steel / Steel
Working temperature °F -58 / +302
Type of lubrication Grease / Oil
Size Range (inner dia.) inch 3/16 – 1

Looking for FC (female) Rod End Sizing?

Rod Ends: MC Sizing

Dimensions (inch) Ultimate Radial
Ball Housing Head Length To Thread Thread Ball Static Load Tilt
Product Bore Width Width Dia. Ball Center Length Size Dia. Capacity Angle Mass
Number d B C D h1 L3 UNF 3A dm (lb) α° (lb)
MC 3 0.190 0.312 0.250 0.625 1.250 .750 10-32 0.437 1,169 13 0.028
MC 4 0.250 0.375 0.281 0.750 1.562 1.000 1/4-28 0.500 2,158 16 0.043
MC 5 0.313 0.437 0.344 0.875 1.875 1.250 5/16-24 0.625 2,784 14 0.072
MC 6 0.375 0.500 0.406 1.000 1.938 1.250 3/8-24 0.719 3,915 12 0.112
MC 7 0.438 0.562 0.437 1.125 2.215 1.375 7/16-24 0.812 4,218 14 0.160
MC 8 0.500 0.625 0.500 1.312 2.438 1.500 1/2-20 0.937 6,660 12 0.249
MC 10 0.625 0.750 0.562 1.500 2.625 1.625 5/8-18 1.125 7,364 16 0.382
MC 12 0.750 0.875 0.687 1.750 2.875 1.750 3/4-16 1.312 11,518 14 0.602
MC 14 0.875 0.875 0.765 2.000 3.375 2.000 7/8-14 1.375 18,476 7 0.906
MC 14-1 0.875 0.875 0.687 2.000 3.375 1.875 7/8-14 1.312 22,843 12 0.906
MC 16 1.000 1.375 1.000 2.750 4.125 2.125 1 1/4-12 1.875 43,541 17 2.406
MC 16-1 1.000 1.375 1.000 2.750 4.125 2.125 1-14 1.875 43,541 17 2.127
MC 16-2 1.000 1.375 1.000 2.750 4.125 2.125 1-12 1.875 43,541 17 2.127

Speak with a bearing expert before placing an order to verify the part will accommodate the intended application usage.

Part numbers are right-hand thread. Left-hand thread will have an “L” after “MC” to read “MCL”.